« Back to Main Site

Crude Oil Board

Oil Discussion
It is currently Sat Oct 25, 2014 12:53 am

All times are UTC




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Mar 05, 2012 9:00 pm 
Offline

Joined: Mon Mar 05, 2012 8:53 pm
Posts: 2
We specialize in repair and retrieval technologies used for oil and gas, we have two main technologies called Terra Slicing and Terra Seal.

Also, looking to acquire oil/gas stripper wells. Oil wells ranging from 4-10/bpd and gas 60,000-80,000 cubic feet are suitable candidates. Interested parties please contact me.

Here is some information pasted from our website:

Terra Slicing:

Patented, advanced excavation technology. Terra Slicing cuts two perpendicular slices, through casing and cement, 3-10 ft. deep into formation, using high-pressure abrasive slurry (5000 psi)
Optionally, Terra Slicing can orient the down hole machine, inject chemical reagents, and create fractures. Terra Slicing eliminates near-well bore compaction, cleans formation and increases permeability. Creates pressure drop in near-well bore zone. Creates vertical permeability that does not exist naturally.

Why Consider Terra Slicing?

Poor Pressure Regime Around the Well bore
Conventional drilling & completion technologies cause high pressure, low permeable area to form around the well bore. Often conventional drilling & completion technologies also damage the near-well bore zone.

Terra Slicing Re-Distributes Stress
Vertical “door-frame” sliced design redistributes mechanical stress to the outside tips of the slices. Removing near-well bore stress creates a pressure drop that increases permeability. Excavation expands the drainage surface area.

Terra Seal:

Terra-Seal is a patented abrasive jet cutting completion process to cut smoothly through casing with high-pressure slurry (up to four or more casings).

Terra-Seal is designed to excavate vertical windows in the cement and deep into near wellbore rock in two 180o-phased directions (up to 4 sets).

The Terra-Seal machine is the only downhole tool that can be pre-programmed to control itself at downhole point of engagement and not at surface, including azimuth orientation. This is a big advantage over competing technologies.

The application of Terra-Seal is ideal in any cement squeeze repair of bad casing; new well completion; secondary recovery of oil or gas production from depleted zones; or where previous completion or fracturing was unstable or ineffective; any open-hole or cased wells that have low permeability, low porosity, high pressure, near-wellbore damage, or other production problems; can be run in vertical or horizontal wells; also to improve water-cut & increase production.


You may reach me below:

Mark Novak
Sales Coordinator
Falconridge Oil Canada Ltd.
T. (905) 771-8520 x227
F. (905) 771-0838

mnovak@falconridgeoil.com
www.falconridgeoil.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group